Wi-Fi PLC for Remote Monitor

Wi-Fi PLC for Remote Monitor

Overview of Characteristic

  • MIPS MCU with 4MB Flash and 8MB SRAM。 Run on eCos
  • Support Virtual COM, Virtual Path Connect to PLC for Remote Monitor
  • Support TCP/IP/Telnet /Modbus TCP Protocol
  • Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 230400 bps
  • Support STA/AP/AP+STA Mode
  • Support Router or Bridge Network Working Mode.
  • Support 10/100M Ethernet Auto-Negotiation
  • Support Easy Configuration Through a Web Interface or PC IOTService Tool
  • Support Security Protocol Such As TLS/AES/DES3
  • Support  Web OTA Wirelss Upgrade  
  • Wide DC Input 5~36VDC
  • Size: 95 x 65 x 25 mm (L x W x H)


Sizing Table

Name HF9610  >>
Image HF9610
Frequency Range 2.412GHz-2.484GHz
Receiver Sensitivity 802.11b: -89dBm 802.11g: -81dBm 802.11n: -71dBm
Basic Frequency 320MHz
Flash 4MB
SDRAM 8MB
Operating System eCos
Interface Standard RS232: DB9 RS485/RS422: 5.08mm connector Support one channel of RS232/RS422/RS485
Rate 10/100M
Protection 8KV Isolation
Network Protocol IP,TCP,UDP,DHCP,DNS,HTTP Server/Client,ARP, BOOTP, AutoIP, ICMP,Web socket, Telnet,uPNP, NTP,Modbus TCP
Security Protocol TLS v1.2 AES 128Bit DES3
Standard 802.11 b/g/n
Network Mode STA/AP/STA+AP
Transmit Power 802.11b: +20dBm (Max.) 802.11g: +18dBm (Max.) 802.11n: +15dBm (Max.)
Antenna Interface 3dBi Stick Antenna
Port Number 1 WAN/LAN switchable
Data Bits 8
Stop Bit 1,2
Check Bit None,Even,Odd
Baud Rate TTL: 300 bps~230400bps
Flow Control No Flow Control Hardware RTS/CTS、DSR/DTR Software Xon/ Xoff flow control
Size 95mm x 65mm x 25mm
Input Voltage 5~36VDC
Working Current ~200mA
Power <700mW
Warranty 1 year
Accessory 1* Power Adapter 1* Serial Cable 1* Ethernet Cable 1* WiFi Antenna
Work Temp。 -25 ~ 85°C
Storage Temp。 -45 ~ 105°C, 5 ~ 95% RH(no condensation)
江苏福彩 甘肃快三 甘肃快3 甘肃快三 甘肃快3 甘肃快3 甘肃快3 星空彩票 江苏福彩 江苏福彩